selected publications

• academic article

  • Biocomposite films based on poly(lactic acid) and chitosan nanoparticles: Elaboration, microstructural and thermal characterization.  Polymer Engineering and Science.  59. 2018
  • Capillary rheometry of a binary mixture polymer/CO2 in a single screw extruder.  Chemical Engineering and Processing - Process Intensification.  93:21-26. 2015
  • Foaming of poly(3-hydroxybutyrate-co-3-hydroxyvalerate)/organo-clays nano-biocomposites by a continuous supercritical CO2 assisted extrusion process.  European Polymer Journal.  61:157-171. 2014
  • Chitosan nanoparticles generation using CO2 assisted processes.  The Journal of Supercritical Fluids.  95:118-128. 2014
  • Effect of supercritical CO₂plasticization on the degradation and residual crystallinity of melt-extruded spironolactone.  Polymers for Advanced Technologies.  25:1135-1144. 2014
  • Flow and mixing efficiency characterisation in a CO2-assisted single-screw extrusion process by residence time distribution using Raman spectroscopy.  Process Safety and Environmental Protection.  92:1210-1218. 2013
  • Use of supercritical CO₂‐aided and conventional melt extrusion for enhancing the dissolution rate of an active pharmaceutical ingredient.  Polymers for Advanced Technologies.  23:909-918. 2011
  • A supercritical tuneable process for the selective extraction of fats and essential oil from coriander seeds.  Journal of Food Engineering.  105:609-616. 2011
  • New challenges in polymer foaming: A review of extrusion processes assisted by supercritical carbon dioxide.  Progress in Polymer Science.  36:749-766. 2010
  • Development of an improved falling ball viscometer for high-pressure measurements with supercritical CO2.  The Journal of Supercritical Fluids.  55:96-106. 2010
  • Cocoa Butter Saturated with Supercritical Carbon Dioxide: Measurements and Modelling of Solubility, Volumetric Expansion, Density and Viscosity.  International Journal of Chemical Reactor Engineering.  8. 2010
  • Development of Characterization Techniques of Thermodynamic and Physical Properties Applied to the CO2-DMSO Mixture.  International Journal of Chemical Reactor Engineering.  7. 2009
  • Controlling the structure of a porous polymer by coupling supercritical CO₂ and single screw extrusion process.  Journal of Applied Polymer Science.  115:981-990. 2009
  • Residence time distribution of a pharmaceutical grade polymer melt in a single screw extrusion process.  Process Safety and Environmental Protection.  87:809-816. 2008
  • Preparation of inclusion complex of piroxicam with cyclodextrin by using supercritical carbon dioxide.  The Journal of Supercritical Fluids.  47:326-332. 2008
  • A new supercritical co-injection process to coat microparticles.  Chemical Engineering and Processing - Process Intensification.  47:2228-2237. 2008
  • Maturation of a ketoprofen/β-cyclodextrin mixture with supercritical carbon dioxide.  The Journal of Supercritical Fluids.  41:429-439. 2007
  • Solidification of Precirol® by the expansion of a supercritical fluid saturated melt: From the thermodynamic balance towards the crystallization aspect.  The Journal of Supercritical Fluids.  42:189-199. 2007
  • Comparative Study of Two Processes to Improve the Bioavailability of an Active Pharmaceutical Ingredient: Kneading and Supercritical Technology.  KONA Powder and Particle Journal.  25:217-229. 2007
  • Solubility of carbon dioxide in three lipid-based biocarriers.  The Journal of Supercritical Fluids.  39:13-19. 2006
  • A three step supercritical process to improve the dissolution rate of Eflucimibe.  European Journal of Pharmaceutical Sciences.  26:184-193. 2005
  • Élaboration de solides divisés par fluides supercritiques.  .  2005

• book

  • Science et technologie des poudres et poudres et matériaux frittés : de la poudre au produit fini à propriétés d'usage maîtrisées 2007

• chapter

  • La génération de solides divisés par voie supercritique : principes de base, considérations sur l’état d’avancement des recherches..  EDP Sciences eBooks. 90-105. 2020

• conference paper

  • Processing of PHBV/organo-clays nano-biocomposite foams by continuous supercritical CO2 assisted extrusion.  HAL (Le Centre pour la Communication Scientifique Directe). 2015
  • Development of Nanostructured Films Based on PLA and Chitosan Nanoparticles Generated by Supercritical CO2 Assisted Processes.  HAL (Le Centre pour la Communication Scientifique Directe). 2014
  • Processing and characterization of PHBV/clay nano-biocomposite foams by supercritical CO2 assisted extrusion.  HAL (Le Centre pour la Communication Scientifique Directe). 2014
  • A Continuous Foaming Process of Low-Density PLA by Supercritical CO2 Assisted Extrusion.  . 2014
  • Dissolution enhancement of active pharmaceutical ingredients in Eudragit E100 by melt extrusion coupled with supercritical carbon dioxide.  . 2014
  • Supercritical anti-solvent and atomization processes for the elaboration of nanoparticles of chitosan.  . 2014
  • Dispersion of an Active Pharmaceutical Ingredient in Eudragit E100 by Melt Extrusion Coupled with Supercritical Carbon Dioxide.  HAL (Le Centre pour la Communication Scientifique Directe). 2013
  • Chitosan nanoparticles generation by antisolvent effect, using a process assisted by supercritical CO2.  HAL (Le Centre pour la Communication Scientifique Directe). 2013
  • Polypropylene grafting in supercritical carbon dioxide.  HAL (Le Centre pour la Communication Scientifique Directe). 2012
  • Design of a PHB-HV/clay nanocomposite foam by using sc-CO2 assisted extrusion.  HAL (Le Centre pour la Communication Scientifique Directe). 2011
  • On-line rheological measurement of a binary mixture polymer/sc-CO2 in an extruder.  HAL (Le Centre pour la Communication Scientifique Directe). 2011
  • Evolution de la microstructure et influence de la pollution atmosphérique lors de la mise en oeuvre d'une résine thermodurcissable.  HAL (Le Centre pour la Communication Scientifique Directe). 2010
  • A one-pot process for the extraction of fats and essential oil from coriander seeds by supercritical CO2.  HAL (Le Centre pour la Communication Scientifique Directe). 2010
  • Biosourced polymer foam production using a (SC CO2) -assisted extrusion process.  HAL (Le Centre pour la Communication Scientifique Directe). 2010
  • Control of the dissolution rate of an active pharmaceutical ingredient by using melt extrusion coupled with supercritical CO2.  . 2010
  • Mesure du gonflement d'un polymère d'origine renouvelable en présence de dioxyde de carbone supercritique.  HAL (Le Centre pour la Communication Scientifique Directe). 2009
  • Characterization of melted cocoa butter saturated with supercritical CO2.  . 2009
  • Biopolymer foam production using a (SC CO2)-assisted extrusion process.  HAL (Le Centre pour la Communication Scientifique Directe). 2009
  • Development of a falling body viscosimeter for high pressure measurements.  HAL (Le Centre pour la Communication Scientifique Directe). 2009
  • Application of the Markov chain theory for modelling residence time distribution in a single screw extruder.  . 2008
  • Crystallisation of solutes in the ionic liquid [AMIm]Cl assisted by SC-CO2.  HAL (Le Centre pour la Communication Scientifique Directe). 2008
  • Particle generation using supercritical fluids: industrial examples in the food and the pharmaceutical industries.  . 2007
  • Mesures rhéologiques sur un biopolymère.  HAL (Le Centre pour la Communication Scientifique Directe). 2007
  • Mesures rhéologiques sur un biopolymère.  HAL (Le Centre pour la Communication Scientifique Directe). 2007
  • Extrusion de l'Eudragit E100 assistée par du CO2 supercritique : détermination de la distribution des temps de séjour.  HAL (Le Centre pour la Communication Scientifique Directe). 2007
  • Improvement of extrusion processes using supercritical carbon dioxide.  HAL (Le Centre pour la Communication Scientifique Directe). 2007
  • Properties measurement of the binary ionic liquid bmimPF6/SC-CO2 : 1 -Solubility and density.  . 2006
  • Properties measurement of the binary ionic liquid bmimPF6/SC-CO2 : 2 -Viscosity.  . 2006
  • Characterization of the ionic liquid bmimPF6 in supercritical conditions.  HAL (Le Centre pour la Communication Scientifique Directe). 2005
  • Study of the maturation of a ketaprofen B-cyclodextrin mixture assisted by supercritical fluid.  . 2005
  • Particle size measurement to determine coating and microencapsulation efficiency made by supercritical fluid processing.  HAL (Le Centre pour la Communication Scientifique Directe). 2005
  • Supercritical carbon dioxide : an efficient tool for the production of ultra-fine particles for the food and pharmaceutical industries.  HAL (Le Centre pour la Communication Scientifique Directe). 2004
  • A SUPERCRITICAL PROCESS TO PRODUCE COCOA BUTTER AND CHOCOLATE PARTICLES FOR THE SEEDING OF CHOCOLATE.  . 2004
  • Coating of nanoparticles using a supercritical anti solvent (SAS) process.  HAL (Le Centre pour la Communication Scientifique Directe). 2004
  • RESS or SAS: elements of choice for fine particle production.  HAL (Le Centre pour la Communication Scientifique Directe). 2002
  • Use of ress and sas processes for powder generation of an active substance.  HAL (Le Centre pour la Communication Scientifique Directe). 2002
  • Particle generation by sas process : effect of the operating conditions on the specific surface area of the powder.  HAL (Le Centre pour la Communication Scientifique Directe). 2002
  • High pressure phase equilibrum behaviour of naphthalene in supercritical co2 experimental results and calculation with the peng-robinson equation of state.  . 2002
  • Présentation générale du séchage des gels de silice nanostructures.  HAL (Le Centre pour la Communication Scientifique Directe). 2002
  • Importance of particle size and mineralogy on porosity and specific surface area of chilean volcanic soils.  HAL (Le Centre pour la Communication Scientifique Directe). 2000
  • Investigations on microwave and vacuum drying experiments drying of a model porous medium at laboratory scale.  HAL (Le Centre pour la Communication Scientifique Directe). 2000

• document

  • STP 2007 - Science et technologie des poudres et poudres et matériaux frittés : de la poudre au produit fini à propriétés d'usage maîtrisées, Albi, France, du 23-25 mai 2007.  HAL (Le Centre pour la Communication Scientifique Directe). 2007