selected publications
-
academic article
- Laser metal deposition as repair technology for Inconel 718. The International Journal of Advanced Manufacturing Technology. 2025
- Role of oxidation in thermal fatigue damage mechanisms and life of X38CrMoV5 (AISI H11) hot work tool steel. International Journal of Fatigue. 190:108584-108584. 2024
- Stress Corrosion Cracking Behavior of Austenitic Stainless Steel 316L Produced Using Laser-Based Powder Bed Fusion. CORROSION. 79:944-956. 2023
- Effect of process parameters of Plain Water Jet on the cleaning quality, surface and material integrity of Inconel 718 milled by Abrasive Water Jet. Tribology International. 178:108094-108094. 2022
- Multi-scale analysis of the damage and contamination in abrasive water jet drilling of GLARE fibre metal laminates. Journal of Manufacturing Processes. 84:610-621. 2022
- High cycle fatigue behavior of 316L steel fabricated by laser powder bed fusion: Effects of surface defect and loading mode. International Journal of Fatigue. 160:106843-106843. 2022
- Correlation between microstructure and cyclic behavior of 316L stainless steel obtained by Laser Powder Bed Fusion. Fatigue & Fracture of Engineering Materials & Structures. 45:1505-1520. 2022
- Multi-scale characterization of material and surface integrity of Inconel 718 when milling by Abrasive Water Jet process: Context of repair application. ESAFORM 2021. 2021
- Influence of abrasive water jet parameters on the surface integrity of Inconel 718. The International Journal of Advanced Manufacturing Technology. 114:997-1009. 2021
- Plain water jet cleaning of titanium alloy after abrasive water jet milling: Surface contamination and quality analysis in the context of maintenance. Wear. 477:203833-203833. 2021
- Screening for Al2O3 failure in MCrAlY APS coatings using short-term oxidation at high temperature. Corrosion Science. 184:109334-109334. 2021
- Performance of lightweight mortar reinforced with doum palm fiber. Journal of Composite Materials. 55:1591-1607. 2020
- Multi-scale analysis of the generated damage when machining pockets of 3D woven composite for repair applications using abrasive water jet process: Contamination analysis. Composites Part A Applied Science and Manufacturing. 139:106118-106118. 2020
- A new insight on the analysis of residual stresses related distortions in selective laser melting of Ti-6Al-4V using the improved bridge curvature method. Additive manufacturing. 36:101586-101586. 2020
- Fire behaviour of hybrid filament-wound single and adhesively bonded composites tubes under static pressure. Polymer Testing. 91:106815-106815. 2020
- A robust method for mechanical characterization of heterogeneous materials by nanoindentation grid analysis. Materials & Design. 194:108908-108908. 2020
- Experimental study of thrust force and surface quality when drilling hybrid stacks. The International Journal of Advanced Manufacturing Technology. 107:3981-3994. 2020
- New tool for reduction of harmful particulate dispersion and to improve machining quality when trimming carbon/epoxy composites. Composites Part A Applied Science and Manufacturing. 131:105806-105806. 2020
- Oxygen/nitrogen-assisted embrittlement of titanium alloys exposed at elevated temperature. MATEC Web of Conferences. 321:06004-06004. 2020
- New model for the prediction of the machining depth during milling of 3D woven composite using abrasive waterjet process. Composite Structures. 234:111760-111760. 2019
- The effect of doum palm fibers on the mechanical and thermal properties of gypsum mortar. Journal of Composite Materials. 53:2641-2659. 2019
- Characterisation of 4043 aluminium alloy deposits obtained by wire and arc additive manufacturing using a Cold Metal Transfer process. Science and Technology of Welding & Joining. 24:538-547. 2019
- AnT²COK, an analytical model for cyclic oxidation kinetics of hot-work tool steels in transient thermal cycling conditions. Corrosion Science. 147:169-181. 2018
- Effect of aluminizing and oxidation on the thermal fatigue damage of hot work tool steels for high pressure die casting applications. International Journal of Fatigue. 119:126-138. 2018
- Improvement of the bridge curvature method to assess residual stresses in selective laser melting. Additive manufacturing. 22:320-329. 2018
- Analytical and experimental investigation of the delamination during drilling of composite structures with core drill made of diamond grits: X-ray tomography analysis. Journal of Composite Materials. 52:1281-1294. 2017
- Metal dusting corrosion of austenitic alloys at low and high pressure with the effects of Cr, Al, Nb and Cu. Corrosion Science. 123:310-318. 2017
- Numerical simulation of thermal fatigue behavior in a cracked disc of AISI H-11 tool steel. Engineering Failure Analysis. 62:242-253. 2016
- Fatigue life modelling of hot forming tools. . 455-464. 2009
- Experimental conditions and environment effects on thermal fatigue damage accumulation and life of die-casting steel X38CrMoV5 (AISI H11). International Journal of Microstructure and Materials Properties. 3:336-336. 2008
-
blog posting
- Influence of Abrasive Water Jet parameters on the surface integrity of Inconel 718. Research Square (Research Square). 2021
-
conference paper
- Oxygen/nitrogen-assisted degradation of the mechanical behavior of titanium alloys exposed at elevated temperature. HAL (Le Centre pour la Communication Scientifique Directe). 2019
- Effect of strain rate on the behavior and failure of 2024 and 7075 aluminum alloys. HAL (Le Centre pour la Communication Scientifique Directe). 2016
- Thermomechanical behaviour and microstructural evolution of high temperature forged Ti-6Al-4V during heat treatment quenching. HAL (Le Centre pour la Communication Scientifique Directe). 2015
- Interaction between aluminizing, oxidation and thermal fatigue in aluminium die casting tool. HAL (Le Centre pour la Communication Scientifique Directe). 2012
- Fatigue life modelling of hot forming tools. HAL (Le Centre pour la Communication Scientifique Directe). 2009
- Oxidation and corrosion effects on non-isothermal fatigue of hot work tool steel X38CrMoV5 (AISI H11). HAL (Le Centre pour la Communication Scientifique Directe). 2009
-
document
- Piston's thermal fatigue testing device for thermal engine in motor vehicle, has optical pyrometer that measures maximum temperature in part of piston, and optical measurement unit that indicates structural damage of piston. HAL (Le Centre pour la Communication Scientifique Directe). 2011
-
thesis
Co-author Network