selected publications

• academic article

  • Oxygen production by solar vapor-phase pyrolysis of lunar regolith simulant.  Acta Astronautica.  224:215-225. 2024
  • Impact of additives on the quality of oxide/oxide tow-pregs obtained by continuous fibre impregnation.  Composites Part A Applied Science and Manufacturing.  184:108238-108238. 2024
  • Composite laminates reinforced by vertically aligned carbon nanotubes: Detailed manufacturing process, from nanotubes transfer to composite consolidation.  Journal of Composite Materials.  57:4239-4253. 2023
  • Contribution of high-temperature 3D-Digital Image Correlation to investigate the creep behaviour of refractory materials.  Open Ceramics.  15:100425-100425. 2023
  • Mode I and mode II fracture behavior in nano‐engineered long fiber reinforced composites.  Polymer Composites.  44:4016-4026. 2023
  • Nano-engineered prepreg manufacturing: control of capillary rise of resin into VACNTs’ forests.  Carbon letters.  33:1019-1025. 2023
  • Dynamic characterization approach for the investigation of microstructural changes in clay-based materials during firing.  Open Ceramics.  13:100326-100326. 2022
  • Ultrasonic welding of CF/PEEK composites: Influence of welding parameters on interfacial temperature profiles and mechanical properties.  Composites Part A Applied Science and Manufacturing.  162:107074-107074. 2022
  • Feasibility of additive manufacturing processes for lunar soil simulants.  Advanced Technologies & Materials.  47:39-43. 2022
  • Rheophysical study of dispersed alumina suspensions.  Powder Technology.  393:630-638. 2021
  • Enabling pseudo-ductility in geopolymer based glass-ceramics matrix composites by slurry dilution.  Open Ceramics.  7:100156-100156. 2021
  • Strength Loss of Basalt-Based Mineral Fibers after Thermal Desizing.  Revue des composites et des matériaux avancés.  30:115-122. 2020
  • An experimental and simulation study of heteroaggregation in a binary mixture of alumina and silica colloids.  Colloids and Surfaces A Physicochemical and Engineering Aspects.  605:125350-125350. 2020
  • Rheology evolution of a geopolymer precursor aqueous suspension during aging.  International Journal of Applied Ceramic Technology.  17:1802-1810. 2020
  • SERIES PARTS MANUFACTURING BY INFRARED SUPERPLASTIC FORMING WITH NUMERICAL TECHNIQUES FOR THERMAL REGULATION.  MATEC Web of Conferences.  321:03025-03025. 2020
  • Imprégnation et transfert de tapis de Nanotubes de Carbone Alignés Verticalement sur du préimprégné.  .  2019
  • Influence of temperature cycles on strength and microstructure of spray-deposited Si–Al CE9F alloy.  Mechanics of Materials.  131:93-101. 2019
  • The Impact of the Particle Size Distribution of Organic Additives on the Microstructure of a Clay Ceramic and Its Thermal and Mechanical Properties.  Journal of Materials in Civil Engineering.  30. 2018
  • The impact of the particle size distribution of organic additives on the microstructure of a clay ceramic and its thermal and mechanical properties.  .  2018
  • Modeling of the thermal and mechanical properties of clay ceramics incorporating organic additives.  Materials Science and Engineering A.  708:375-382. 2017
  • Effect of dicumyl peroxide concentration on the polymerization kinetics of a polysilazane system.  Polymer Engineering and Science.  58:859-869. 2017
  • New advances in the laboratory characterization of refractories: testing and modelling.  Metallurgical Research & Technology.  114:610-610. 2017
  • The impact of heat treatment on the microstructure of a clay ceramic and its thermal and mechanical properties.  Ceramics International.  43:1747-1754. 2016
  • The impact of the particle shape of organic additives on the anisotropy of a clay ceramic and its thermal and mechanical properties.  Construction and Building Materials.  125:654-660. 2016
  • Experimental analysis of SiC-based refractory concrete in hybrid rocket nozzles.  Acta Astronautica.  126:168-177. 2016
  • Experimental and numerical investigation of the asymmetric primary creep of a fibre reinforced refractory concrete at 1200 °C.  Journal of the European Ceramic Society.  36:2627-2639. 2016
  • Probabilistic rupture analysis of a brittle spray deposited Si–Al alloy under thermal gradient: Characterization and thermoelastic sizing guidelines.  Materials & Design.  95:414-421. 2016
  • Cure kinetics of a polysilazane system: Experimental characterization and numerical modelling.  European Polymer Journal.  76:40-52. 2016
  • Moules pour formage superplastique du titane : matériaux, propriétés et conception.  HAL (Le Centre pour la Communication Scientifique Directe).  2015
  • Quantitative assessment of the interfacial roughness in multi-layered materials using image analysis: Application to oxidation in ceramic-based materials.  Journal of the European Ceramic Society.  35:1063-1079. 2014
  • Preliminary tests of silicon carbide based concretes for hybrid rocket nozzles in a solar furnace.  Acta Astronautica.  99:242-251. 2014
  • Investigation and FEA-based simulation of tool wear geometry and metal oxide effect on cutting process variables.  Simulation Modelling Practice and Theory.  42:84-97. 2014
  • Modelling of the swelling induced by oxidation in SiC-based refractory castables.  Mechanics of Materials.  68:253-266. 2013
  • Microstructural analysis of wear micromechanisms of WC–6Co cutting tools during high speed dry machining.  International Journal of Refractory Metals and Hard Materials.  42:151-162. 2013
  • Mise en oeuvre et caractérisation de composites innovants à matrice vitrocéramique.  .  2013
  • Applicability of image correlation techniques to characterise asymmetric refractory creep during bending tests.  Journal of the European Ceramic Society.  33:221-231. 2012
  • A new heat transfer analysis in machining based on two steps of 3D finite element modelling and experimental validation.  Heat and Mass Transfer.  49:129-145. 2012
  • Ceramic fibre reinforced refractory castables for very high temperature superplastic forming.  Materialwissenschaft und Werkstofftechnik.  43:758-762. 2012
  • Thermal behaviour modelling of superplastic forming tools.  Materialwissenschaft und Werkstofftechnik.  43:799-804. 2012
  • Temperature evolution in a WC-6% Co cutting tool during turning machining : experiment and finite element simulations.  HAL (Le Centre pour la Communication Scientifique Directe).  2011
  • Mécanismes d'endommagement tribologiques du WC-6% CO en usinage 2010
  • A new method to determine Young's modulus of refractory.  HAL (Le Centre pour la Communication Scientifique Directe).  2010
  • A new method to determine the Young's modulus of refractory materials.  HAL (Le Centre pour la Communication Scientifique Directe).  2010
  • Wear mechanisms of WC–Co cutting tools from high-speed tribological tests.  Wear.  267:890-897. 2009
  • The Study of Properties of WC-Based and W-Based Composites Fabricated by Infiltration with Liquid Cu-Mn Binder.  Asian Journal of Scientific Research.  2:76-86. 2009
  • Fiber reinforced refractory castables for SPF toolings.  Materialwissenschaft und Werkstofftechnik.  39:317-321. 2008
  • Oxidation modelling of a Si3N4–TiN ceramic: Microstructure and kinetic laws.  Ceramics International.  33:1331-1339. 2006
  • Characterisation of microstructural evolutions in refractory castables by in situ high temperature ESEM.  Journal of Materials Processing Technology.  155-156:1474-1481. 2004
  • Pullout of steel fibres from a refractory castable: experiment and modelling.  Mechanics of Materials.  37:427-445. 2004
  • The role of molybdenum in the hard-phase grains of (Ti, Mo)(C, N)–Co cermets.  The Philosophical Magazine A Journal of Theoretical Experimental and Applied Physics.  84:1717-1733. 2004
  • Design of SPF Dies Based on Advanced Material Behaviour Models.  Materials science forum.  447-448:123-130. 2004
  • Characterisation of microstructural evolutions in refractory castables by in situ-high temperature ESEM 2003
  • Oxidation of a Silicon Nitride‐Titanium Nitride Composite: Microstructural Investigations and Phenomenological Modeling.  Journal of the American Ceramic Society.  85:1860-1866. 2002
  • Numerical simulation of failure prediction for ceramic tools: comparison with forging test results.  Journal of Materials Processing Technology.  92-93:502-507. 1999
  • Investigation into the potential of a composite combining toughness and plastic deformation resistance.  International Journal of Refractory Metals and Hard Materials.  17:79-89. 1999
  • Structural and mechanical properties of a refractory concrete for superplastic forming tools.  HAL (Le Centre pour la Communication Scientifique Directe).  1999
  • Elasticity of Si-C-O and C fibres at high temperature.  Scripta Materialia.  37:1005-1010. 1997
  • Comportement mécanique à haute température du métal dur et de différents cermets de coupe.  Matériaux & Techniques.  85:13-20. 1997

• chapter

  • Contributor contact details.  Elsevier eBooks. xi-xii. 2011
  • Processes and equipment for superplastic forming of metals.  Elsevier eBooks. 49-71. 2011

• conference paper

  • Microstructural analysis and mechanical behaviour of oxide/oxide cmcs prepared by continuous tow impregnation.  . 2024
  • Additive manufacturing on the Moon with Selective Laser Melting: mechanical properties and microstructure of printed small objects.  . 2024
  • Selective laser melting of regolith for optimized small objects manufacturing in a lunar ISRU context.  . 2024
  • A numerical method to simulate the intra-tows mechanical behaviour of oxide/oxide CMCs: coupling of a lattice with a FE continuum.  . 2023
  • Effect of varying the proportion of crystalline-amorphous phases in a lunarregolith analog and resulting physical properties for isru selective laser melting.  HAL (Le Centre pour la Communication Scientifique Directe). 2023
  • Characterization and physical properties of a lunar regolith analog for powder bed fusion-based additive manufacturing processes.  HAL (Le Centre pour la Communication Scientifique Directe). 2022
  • Mechanical behavior of a NextelTM 610/alumina-silica, oxide/oxide ceramic matrix composite.  HAL (Le Centre pour la Communication Scientifique Directe). 2021
  • EVOLUTION OF THE RHEOLOGICAL BEHAVIOUR OF AN AQUEOUS SUSPENSION OF GEOPOLYMERIC PRECURSORS DURING AGEING.  HAL (Le Centre pour la Communication Scientifique Directe). 2019
  • Formulation of oxide suspensions for liquid processing of ceramic matrix composites.  HAL (Le Centre pour la Communication Scientifique Directe). 2019
  • Using X-Ray tomography to evaluate porosities in composite parts.  HAL (Le Centre pour la Communication Scientifique Directe). 2019
  • Imprégnation et transfert de tapis de nanotubes de carbone alignés verticalement sur un préimprégné.  HAL (Le Centre pour la Communication Scientifique Directe). 2019
  • Influence du désensimage par traitement thermique sur les propriétés mécaniques de fibres de basalte.  HAL (Le Centre pour la Communication Scientifique Directe). 2019
  • Influence of the forming process on the mechanical behavior of a commingled carbon PPS composite part.  AIP conference proceedings. 020021-020021. 2018
  • Utilisation de la corrélation d'images pour le suivi de la mise en forme de renfort textile dans le cadre de la fabrication de pièces composites pour l'aéronautique.  HAL (Le Centre pour la Communication Scientifique Directe). 2017
  • Temperature effect on the strength of a spray deposited Si-Al alloy for space application (abstract).  HAL (Le Centre pour la Communication Scientifique Directe). 2015
  • Improvement of fired clay bricks properties through biomass incorporation.  HAL (Le Centre pour la Communication Scientifique Directe). 2014
  • Investigation of the thermo-mechanical and ablative behaviour of silicon carbide based concretes exposed to hybrid propulsion environments.  HAL (Le Centre pour la Communication Scientifique Directe). 2013
  • Innovative glass-ceramic matrix composites : processing and characterization.  HAL (Le Centre pour la Communication Scientifique Directe). 2013
  • Processing and characterization of innovative glass-ceramic matrix composites.  HAL (Le Centre pour la Communication Scientifique Directe). 2013
  • Low cost refractory castable die development for titanium sheet superplastic forming.  HAL (Le Centre pour la Communication Scientifique Directe). 2013
  • Characterisation of an inorganic based resin for the liquid moulding processing of composites for intermediate temperature applications.  HAL (Le Centre pour la Communication Scientifique Directe). 2012
  • Modelling of the Swelling of SiC-Based Refractory Lining Used in Waste-to-Energy Plants.  . 321-326. 2012
  • Fibre reinforced refractory concrete as a tooling material for organic matrix composite processing routes.  HAL (Le Centre pour la Communication Scientifique Directe). 2012
  • Processing glass-ceramic matrix composites by liquid moulding : characterisation of the rheology of a resin derived from a geopolymeric system.  HAL (Le Centre pour la Communication Scientifique Directe). 2012
  • Modelling of the oxidation induced strain of silicon-carbide-based refractories castables.  HAL (Le Centre pour la Communication Scientifique Directe). 2012
  • Comportement non-linéaire de bétons réfractaires renforcés de fibres..  HAL (Le Centre pour la Communication Scientifique Directe). 2012
  • Mechanical engineering simulation of asymmetric creep for ceramic materials with the Drucker-Prager model.  HAL (Le Centre pour la Communication Scientifique Directe). 2012
  • New coatings for SPF tools made of a metallic fibre reinforced refractory castable.  HAL (Le Centre pour la Communication Scientifique Directe). 2012
  • Processing glass-ceramic matrix composites by liquid moulding: characterization of the rheology of a resin derived from a geopolymeric system.  HAL (Le Centre pour la Communication Scientifique Directe). 2012
  • Étude du comportement à très haute température de bétons réfractaires à base de SiC pour application en environnement de propulsion hybride.  HAL (Le Centre pour la Communication Scientifique Directe). 2012
  • Comportement mécanique de bétons réfractaires fibrés.  HAL (Le Centre pour la Communication Scientifique Directe). 2011
  • Endommagement du WC-Co en usinage.  HAL (Le Centre pour la Communication Scientifique Directe). 2010
  • Identification du module d'Young de matériaux réfractaires à base SiC.  HAL (Le Centre pour la Communication Scientifique Directe). 2010
  • Damage and creep modelling for refractory structure sizing.  HAL (Le Centre pour la Communication Scientifique Directe). 2010
  • Microstructural design and study of fibre reinforced refractory concretes.  HAL (Le Centre pour la Communication Scientifique Directe). 2010
  • Wear mechanisms of WC-6% CO by machining.  HAL (Le Centre pour la Communication Scientifique Directe). 2010
  • Ceramic die technology for superplastic forming : state of the art and recent improvements.  HAL (Le Centre pour la Communication Scientifique Directe). 2010
  • Comportement thermomécanique de bétons réfractaires renforcés de fibres.  HAL (Le Centre pour la Communication Scientifique Directe). 2010
  • Microstructure et comportement mécanique à haute température de réfractaires à base de SiC et à liaison nitrure.  HAL (Le Centre pour la Communication Scientifique Directe). 2010
  • Thermo mechanical characterisation of monolithic castables.  HAL (Le Centre pour la Communication Scientifique Directe). 2010
  • Damage modelling in a fiber reinforced refractory castable..  HAL (Le Centre pour la Communication Scientifique Directe). 2009
  • Innovative SPF toolings based on reinforced refractory concretes.  HAL (Le Centre pour la Communication Scientifique Directe). 2009
  • Microstructure and thermomechanical behaviour of a SiC-based refractory.  HAL (Le Centre pour la Communication Scientifique Directe). 2009
  • Development and thermomechanical behavior of fiber reinforced refractory concretes..  HAL (Le Centre pour la Communication Scientifique Directe). 2009
  • Microstructure and thermomechanical behaviour of SiC-based refractories..  HAL (Le Centre pour la Communication Scientifique Directe). 2009
  • Numerical Simulation of Failure Prediction for Ceramics Tools: Comparison with Forging Test Results.  . 1997
  • Microstructure and mechanical properties of Ti(C,N)-Mo2C-(Ni,Co) cermets as a function of their initial chemical composition.  . 1997

• document

  • De la poudre au matériau massif : colloque. Commission poudres et matériaux frittés SF2M-GFC - Journées annuelles du RFM, Albi, France, du 03-05 juin 2003.  HAL (Le Centre pour la Communication Scientifique Directe). 2003