selected publications

• academic article

  • Permeability Measurement of Glass-Fiber Textiles Used in Composites Industry Using Radial Flow Experimental Setup and Comparison with Image-Based Numerical Methods.  Sci.  6:49-49. 2024
  • Toward the modelling of laminated veneer lumber stiffness and the influence of the number of plies.  Wood Science and Technology.  58:1111-1139. 2024
  • Integration Technology with Thin Films Co-Fabricated in Laminated Composite Structures for Defect Detection and Damage Monitoring.  Micromachines.  15:274-274. 2024
  • Wood and plywood as eco-materials for sustainable mobility: A review.  Composite Structures.  329:117790-117790. 2023
  • Toward the development of a new smart composite structure based on piezoelectric polymer and flax fiber materials: Manufacturing and experimental characterization.  Mechanics of Advanced Materials and Structures.  31:9345-9359. 2023
  • Static and dynamic crushing of sandwich tubes with composite skins and three plywood cores (poplar, birch, and oak).  International Journal of Crashworthiness.  29:626-647. 2023
  • Numerical analysis of the impact behaviour of a composite eco-structure.  Composite Structures.  324:117511-117511. 2023
  • Mode I delamination R-curve in poplar laminated veneer lumber.  Theoretical and Applied Fracture Mechanics.  126:103982-103982. 2023
  • Integrated modeling of heat transfer, shear rate, and viscosity for simulation-based characterization of polymer coalescence during material extrusion.  Journal of Manufacturing Processes.  90:443-459. 2023
  • A comparison of three wood species (poplar, birch and oak) for crash application.  European Journal of Wood and Wood Products.  81:125-141. 2022
  • Impact Behaviors of Sandwich Composites Produced by Liquid Resin Infusion: Influences of the Process Parameters.  Journal of Aerospace Engineering.  35. 2022
  • Efficient polymerization and crystallization kinetics coupling of polyamide 6 synthesis for liquid composite molding process modeling.  Polymer Engineering and Science.  62:999-1012. 2022
  • Dynamic crushing of wood-based sandwich composite tubes.  Mechanics of Advanced Materials and Structures.  29:7004-7024. 2021
  • Static crushing of wood based sandwich composite tubes.  Composite Structures.  273:114317-114317. 2021
  • Caractérisation de tubes sandwichs bois-carbone pour des applications de crash.  .  2021
  • Modeling the reactive PA6 flow for LCM processes.  ESAFORM 2021.  2021
  • Crashworthiness of poplar wood veneer tubes.  International Journal of Impact Engineering.  147:103738-103738. 2020
  • A study on resin infusion and effects of reinforcement structure at dual scales by a quasi-realistic numerical simulation method.  Journal of Composite Materials.  54:4157-4171. 2020
  • Modeling of the polymerization and crystallization kinetic coupling of polyamide 6 synthesized from ε-caprolactam.  Polymer.  180:121681-121681. 2019
  • Développement et caractérisation d'éco-structures composites à base de bois.  21ème Journées Nationales sur les Composites.  2019
  • Experimental investigation of compression and compression after impact of wood-based sandwich structures.  Composite Structures.  220:236-249. 2019
  • Numerical modeling of impact on wood-based sandwich structures.  Mechanics of Advanced Materials and Structures.  27:1583-1598. 2019
  • Influence of printing parameters on the stability of deposited beads in fused filament fabrication of poly(lactic) acid.  Additive manufacturing.  25:112-121. 2018
  • Influence of structural parameters at microscale on the fiber reinforcement.  Journal of Composite Materials.  53:863-872. 2018
  • Diagramme TTT isotherme de la polymérisation anionique du PA6 à partir de l'ε-caprolactame.  Revue des composites et des matériaux avancés.  28:89-110. 2018
  • Experimental investigation of impact behavior of wood-based sandwich structures.  Composites Part A Applied Science and Manufacturing.  109:10-19. 2018
  • Experimental study of polymerization and crystallization kinetics of polyamide 6 obtained by anionic ring opening polymerization of ε-caprolactam.  Polymer.  132:88-97. 2017
  • NDT-based design of joint material for the detection of bonding defects by infrared thermography.  NDT & E International.  93:157-163. 2017
  • Manufacturing and quasi-static bending behavior of wood-based sandwich structures.  Composite Structures.  182:487-504. 2017
  • TTT diagram of the anionic polymerization PA6 from ε-Caprolactam [epsilon-caprolactam] 2017
  • Bonded repair issues for composites: An investigation approach based on infrared thermography.  NDT & E International.  85:27-33. 2016
  • BEM computation of 3D Stokes flow including moving front.  International Journal of Material Forming.  10:567-580. 2016
  • Heat source estimation in anisotropic materials.  Composite Structures.  136:287-296. 2015
  • Damage detection in CFRP by coupling acoustic emission and infrared thermography.  Composites Part B Engineering.  85:68-75. 2015
  • Determination of the elastic properties in CFRP composites: comparison of different approaches based on tensile tests and ultrasonic characterization.  Advances in aircraft and spacecraft science.  2:249-261. 2015
  • Application of non destructive testing to the detection of aeronautical defects in composite structure.  HAL (Le Centre pour la Communication Scientifique Directe).  2013
  • BEM‐based models to simulate the resin flow at macroscale and microscale in LCM processes.  Polymer Composites.  34:1235-1244. 2013
  • BEM-based models to simulate the resin flow at macro and micro scales in LCM processes.  HAL (Le Centre pour la Communication Scientifique Directe).  2013
  • Numerical Simulation of Resin Transfer Molding Using BEM and Level Set Method.  International Journal of Material Forming.  3:635-638. 2010

• blog posting

  • Toward the modelling of Laminated Veneer Lumber Stiffness and the influence of the number of plies.  Research Square (Research Square). 2023

• conference paper

  • Assessing the hole resistance of poplar LVL.  . 2024
  • INFLUENCE OF THE NUMBER OF PLIES ON THE STIFFNESS OF LAMINATED VENEER LUMBER.  . 2024
  • On the mechanical characterization of plywood interfaces.  . 2024
  • Evaluation du taux de restitution d'énergie en mode I d'un LVL de peuplier.  . 2023
  • Dual-scale flow simulation for LCM processes.  HAL (Le Centre pour la Communication Scientifique Directe). 2023
  • Caractérisation mécanique et modélisation du contreplaqué de peuplier.  . 2023
  • On the crashworthiness properties of plywood..  HAL (Le Centre pour la Communication Scientifique Directe). 2022
  • Mechanical characterization and modelling of poplar plywood..  HAL (Le Centre pour la Communication Scientifique Directe). 2022
  • Static and dynamic crushing of sandwich tubes with a birch core and carbon skins.  HAL (Le Centre pour la Communication Scientifique Directe). 2022
  • Le bois, un matériau pour la mobilité durable?.  HAL (Le Centre pour la Communication Scientifique Directe). 2022
  • Wood, a material for sustainable mobility?.  HAL (Le Centre pour la Communication Scientifique Directe). 2022
  • Characterization of wood and carbon sandwich tubes for crash applications.  HAL (Le Centre pour la Communication Scientifique Directe). 2021
  • Wood as a structural material for transportation industry: Past example and recent advances.  HAL (Le Centre pour la Communication Scientifique Directe). 2021
  • A two phases coupling free and porous flow method at multi-scales of LCM process.  . 2019
  • Development and characterization of wood based eco-structures composites.  HAL (Le Centre pour la Communication Scientifique Directe). 2019
  • WOOD-BASED COMPOSITE SANDWICH STRUCTURES.  HAL (Le Centre pour la Communication Scientifique Directe). 2018
  • WOOD-BASED COMPOSITE SANDWICH STRUCTURES.  HAL (Le Centre pour la Communication Scientifique Directe). 2018
  • Optimization of thermal joint behaviour for the detection of bonding defects by infrared thermography.  HAL (Le Centre pour la Communication Scientifique Directe). 2018
  • Influence of parameters controlling the extrusion step in fused filament fabrication (FFF) process applied to polymers using numerical simulation.  AIP conference proceedings. 140003-140003. 2018
  • One shot sandwich composite structure by LRI, influence of manufacturing process parameters on low velocity impact.  HAL (Le Centre pour la Communication Scientifique Directe). 2018
  • Thermographic investigation of heat source in transversely isotropic composites.  AIP conference proceedings. 030043-030043. 2018
  • Analyse de réparations collées par thermographie InfraRouge.  HAL (Le Centre pour la Communication Scientifique Directe). 2017
  • TTT diagram of the anionic polymerization PA6 from ε-Caprolactam.  HAL (Le Centre pour la Communication Scientifique Directe). 2017
  • Diagramme TTT de la polymérisation anionique du PA6 à partir de l'ε-caprolactame et influence des fibres sur les cinétiques.  HAL (Le Centre pour la Communication Scientifique Directe). 2017
  • Comportement thermique d'un joint de colle structural et analyse par thermographie infrarouge : application à la caractérisation de structures composites réparées.  . 2017
  • Numerical Simulation of Infusion at Microscale Permeability Calculation.  HAL (Le Centre pour la Communication Scientifique Directe). 2017
  • One Shot Sandwich Composite Structure by Liquid Resin Infusion: Influence of Manufacturing Process Parameters on Low Velocity Impact.  HAL (Le Centre pour la Communication Scientifique Directe). 2017
  • Toward improvement of the properties of parts manufactured by FFF (fused filament fabrication) through understanding the influence of temperature and rheological behaviour on the coalescence phenomenon.  AIP conference proceedings. 040008-040008. 2017
  • IMPACT BEHAVIOR OF WOOD-BASED SANDWICH STRUCTURES.  HAL (Le Centre pour la Communication Scientifique Directe). 2016
  • Experimental investigation on impact behaviour of wood-based sandwich structures.  HAL (Le Centre pour la Communication Scientifique Directe). 2016
  • Système de Transport de Mortiers lors de Raids d’Artillerie Héliportés.  HAL (Le Centre pour la Communication Scientifique Directe). 2016
  • Identification of damage mechanisms in CFRP composites by coupling acoustic emission and infrared thermography.  . 2015
  • Identification de mécanismes d'endommagement de stratifiés carbone/époxy par couplage entre émission acoustique et thermographie infrarouge.  HAL (Le Centre pour la Communication Scientifique Directe). 2015
  • Utilisation de la thermographie infrarouge et de l'émission acoustique pour l'identification de l'endommagement d'un composite stratifié carbone-époxy.  HAL (Le Centre pour la Communication Scientifique Directe). 2014
  • Identification of the elastic properties in CFRP composites.  HAL (Le Centre pour la Communication Scientifique Directe). 2014
  • Coupling infrared termography and acoustic emission for damage study in CFRP.  HAL (Le Centre pour la Communication Scientifique Directe). 2014
  • Identification de mécanismes d’endommagement de stratifiés carbone/époxy par émission acoustique.  HAL (Le Centre pour la Communication Scientifique Directe). 2014
  • Micro-scale modeling of resin flow by BEM- Permeability computation.  HAL (Le Centre pour la Communication Scientifique Directe). 2014
  • Identification of the elastic properties of composite materials.  HAL (Le Centre pour la Communication Scientifique Directe). 2013
  • Application of non destructive testing to the detection of aeronautical defects in composite structures.  HAL (Le Centre pour la Communication Scientifique Directe). 2013
  • Mold filling simulation of resin transfer molding combining BEM and level set method.  . 2010

• proceedings

  • Material Forming: ESAFORM 2024.  Materials research proceedings. 2024