selected publications

• academic article

  • Laser metal deposition as repair technology for Inconel 718.  The International Journal of Advanced Manufacturing Technology.  2025
  • Contribution of the Self‐Heating Method in the Characterization of the Fatigue Damage of Materials With Defects Resulting From Additive Manufacturing.  Fatigue & Fracture of Engineering Materials & Structures.  2024
  • Fatigue behavior of additively manufactured 316L stainless steel: Competition between the effects of defects and microstructure.  International Journal of Fatigue.  190:108658-108658. 2024
  • Understanding of additively manufactured material cyclic behavior at the grain scale by neutron diffraction and crystal plasticity modelling.  Materials Science and Engineering A.  918:147380-147380. 2024
  • New insights on the origin of grain refinement in 316L additively manufactured alloys.  Scripta Materialia.  249:116174-116174. 2024
  • Effect of re-lasing on the fatigue properties of 316L Stainless Steel Produced by laser powder bed fusion.  Procedia Structural Integrity.  57:87-94. 2024
  • Fatigue properties of as-built and heat-treated Inconel 625 obtained by the hybridization of two laser-powder based additive processes.  International Journal of Fatigue.  172:107650-107650. 2023
  • Effects of building direction and loading mode on the high cycle fatigue strength of the laser powder bed fusion 316L.  International Journal of Fatigue.  170:107506-107506. 2023
  • Combined effect of powder properties and process parameters on the density of 316L stainless steel obtained by laser powder bed fusion.  The International Journal of Advanced Manufacturing Technology.  120:6187-6204. 2022
  • High cycle fatigue behavior of 316L steel fabricated by laser powder bed fusion: Effects of surface defect and loading mode.  International Journal of Fatigue.  160:106843-106843. 2022
  • Correlation between microstructure heterogeneity and multi-scale mechanical behavior of hybrid LPBF-DED Inconel 625.  Journal of Materials Processing Technology.  303:117542-117542. 2022
  • Correlation between microstructure and cyclic behavior of 316L stainless steel obtained by Laser Powder Bed Fusion.  Fatigue & Fracture of Engineering Materials & Structures.  45:1505-1520. 2022
  • Impact of annealing treatment on the fatigue behavior of Inconel 625 produced by laser‐based powder bed fusion.  Fatigue & Fracture of Engineering Materials & Structures.  45:1258-1275. 2022
  • Numerical investigation of the surface and microstructure effects on the high cycle fatigue performance of additive manufactured stainless steel 316L.  International Journal of Fatigue.  149:106273-106273. 2021
  • Effect of powder size and processing parameters on surface, density and mechanical properties of 316L elaborated by Laser Powder Bed Fusion.  ESAFORM 2021.  2021
  • Multi-scale characterization of material and surface integrity of Inconel 718 when milling by Abrasive Water Jet process: Context of repair application.  ESAFORM 2021.  2021
  • Influence of abrasive water jet parameters on the surface integrity of Inconel 718.  The International Journal of Advanced Manufacturing Technology.  114:997-1009. 2021
  • A new insight on the analysis of residual stresses related distortions in selective laser melting of Ti-6Al-4V using the improved bridge curvature method.  Additive manufacturing.  36:101586-101586. 2020
  • A robust method for mechanical characterization of heterogeneous materials by nanoindentation grid analysis.  Materials & Design.  194:108908-108908. 2020
  • Experimental and numerical methodology to obtain the probability of detection in eddy current NDT method.  NDT & E International.  114:102300-102300. 2020
  • A numerical investigation of the high cycle fatigue sensitivity to microstructure and defect.  International Journal of Fatigue.  136:105541-105541. 2020
  • A robust inverse analysis method for elastoplastic behavior identification using the true geometry modeling of Berkovich indenter.  International Journal of Mechanical Sciences.  171:105370-105370. 2019
  • Impact of human and environmental factors on the probability of detection during NDT control by eddy currents.  Measurement.  133:222-232. 2018
  • Improvement of the bridge curvature method to assess residual stresses in selective laser melting.  Additive manufacturing.  22:320-329. 2018

• blog posting

  • Influence of Abrasive Water Jet parameters on the surface integrity of Inconel 718.  Research Square (Research Square). 2021

• chapter

  • Control of the Microstructure and Mechanical Properties of a Super Duplex SAF 2507 Steel Produced by Additive Manufacturing.  Lecture notes in mechanical engineering. 1-9. 2023
  • Manufacturability of CoCrFeNiMnzAlxCuy High Entropy Alloy by Laser Powder Bed Fusion.  Lecture notes in mechanical engineering. 19-27. 2023
  • Microstructure and Mechanical Properties of Hybrid LPBF-DED Inconel 625.  Lecture notes in mechanical engineering. 10-18. 2023

• conference paper

  • Numerical investigation of the competition between roughness and defect in high cycle fatigue.  HAL (Le Centre pour la Communication Scientifique Directe). 2018
  • Optimization of a consistence methodology to obtain probability of detection curves in non-destructive test: integration of human and environmental factors for eddy currents.  HAL (Le Centre pour la Communication Scientifique Directe). 2018
  • Calculs de microstructures en fatigue : pourquoi, comment et avec quels résultats ?.  HAL (Le Centre pour la Communication Scientifique Directe). 2017
  • Implementation of a robust methodology to obtain the probability of detection (POD) curves in NDT: integration of human and ergonomic factors.  HAL (Le Centre pour la Communication Scientifique Directe). 2017
  • Description of ASB-dynamic localisation as a degradation mechanism.  HAL (Le Centre pour la Communication Scientifique Directe). 2016
  • Dispersion sources in nanoindentation test data used to determinate the constitutive law of metallic materials..  HAL (Le Centre pour la Communication Scientifique Directe). 2016
  • Détermination des paramètres des lois de comportement à partir de la courbe de nanoindentation et de la topographie de l'empreinte résiduelle.  HAL (Le Centre pour la Communication Scientifique Directe). 2016
  • Effect of strain rate on the behavior and failure of 2024 and 7075 aluminum alloys.  HAL (Le Centre pour la Communication Scientifique Directe). 2016
  • Etude du comportement à hautes températures d’un alliage TiAl densifié par frittage flash.  HAL (Le Centre pour la Communication Scientifique Directe). 2016
  • Evaluation des contraintes résiduelles dans les alliages de TA6V « Near Net Shape » mis en forme « Spark Plasma Sintering ».  HAL (Le Centre pour la Communication Scientifique Directe). 2016
  • Evaluation des contraintes résiduelles dans les alliages de Ti-6Al-4V mis en forme par SLM et « Spark Plasma Sintering - SPS ».  HAL (Le Centre pour la Communication Scientifique Directe). 2016
  • Evaluation des contraintes résiduelles dans les alliages de Ti-6Al-4V mis en forme par SLM et « Spark Plasma Sintering - SPS ».  . 2016
  • Évaluation des contraintes résiduelles dans l’alliages Ti-6Al-4V mis en forme par SLM.  HAL (Le Centre pour la Communication Scientifique Directe). 2016
  • Utilisation des statistiques des extrêmes pour l’analyse de la durée de vie en fatigue multiaxiale des polycristaux.  HAL (Le Centre pour la Communication Scientifique Directe). 2015